Need help?Do you have a question about the TriBrer EPN90 and is the answer not in the manual?
General| Resolution | 0.01dB |
|---|---|
| Display | LCD |
| Wavelength Range | 800 nm to 1700 nm |
| Power Source | Rechargeable battery |
| Interface | USB |
Critical safety advisories including laser hazards and electrical precautions.
Guidelines for battery use, condensation avoidance, and storage.
Lists the standard accessories included with the PON Optical Power Meter.
Lists optional accessories available for separate purchase.
Identifies and describes the device's buttons, ports, and LCD screen.
Visual instructions for opening the device and correctly inserting batteries.
Illustrates common setup diagrams for PON testing scenarios.
Instructions for controlling device power and the auto power off feature.
How to perform signal tests and interpret results for 1310, 1490, 1550nm.
Explains "PASS", "WRNG", "FAIL" indicators based on thresholds.
How to enable or disable the alarm function for Pass/Warn/Fail status.
How to display stored reference values and save current measurements as new references.
Instructions for switching measurement units between dBm and dB.
How to shift between different threshold setting interfaces.
Detailed guide on setting threshold values and understanding their meaning for alarms.
How to enter the history interface from the PON testing mode.
Instructions for saving current values and browsing historical data.
How to select the Optical Power Meter mode from the function menu.
Details on unit conversion, threshold setting, and reference values in OPM mode.
How to navigate to and view stored OPM measurement history.
Instructions for saving OPM data and moving between history pages.
How to select the Visual Fault Locator mode.
How to change the light status (ON, Flashing, OFF) in VFL mode.
Explains the visual indicators for battery charge levels.
Guidelines and warnings for charging rechargeable batteries.
Tips for keeping the device clean and in good condition.
Lists common problems, their causes, and recommended solutions.
Detailed technical specifications for 1310nm, 1490nm, 1550nm measurements.
Overall technical details like optic connector, power supply, and dimensions.
Detailed technical parameters for the Visual Fault Locator function.
Detailed technical parameters for the Optical Power Meter function.
Lists available model configurations and their integrated features.
To Next Page
