EasyManua.ls Logo

Tricity Bendix CWD 1010 - Operating Sequence: Washing Cotton (cont.); Programme Selection and Machine Start; End of Programme Procedures

Tricity Bendix CWD 1010
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
4. Select the required programme
Turn the programme selector dial clockwise to the
required programme (1 or 2).
6. Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light will
illuminate and the machine starts operating.
7. At the end of the programme
The machine stops automatically.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light will go out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
M0014S
2
P1006
2
T0009
MAINS ON
T0009S
MAINS
ON

Table of Contents

Related product manuals