EasyManua.ls Logo

Tricity Bendix TMG209 - Unpacking and Assembly

Tricity Bendix TMG209
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
Getting Started
Unpacking the MicrowaveOven
Please make sure you read all the instructions and the safety
notes carefully and that you familiarise yourself with the features
and operation of your oven before use.
Removethe polystyrene top packing pieces and liftout the oven.
Unpack the oven completely removingall the protective tape.
Open the oven door. In the oven compartment you should find
the turntable and rotating support ring, and the grill rack.
Unpack all these items .
Check the oven carefully, especially the door, door seals and the
locking mechanism. If any items are missing or damaged, contact
yournearestTesco store for assistance.
If possible retain the packaging. If you dispose of the packaging,
do so having regardto recycling provisions in your area.
Unpacking and Assembly
Control Panel
Assembly and Placement
Place your microwave oven on a flat, level stable work surface
awayfromsources of cold, heat and damp.
For good ventilation, the rear of the oven should have a clearance
of at least 10 cm from the wall, the free distance above the top
should be atleast 20 cmand there should be a gap of at least 5cm
at both sides.
The oven should be plugged directly into the wall socket and not
via an adaptor or any other power sharing device.
Open the oven door.
Place theTurntableSupport Ring in the oven
Lower the turntable onto the Rotor. There is a recess in the
turntable to lock securely on the rotor.
You must always operate your microwave oven with the
turntable assembly properly in place.
Installing theTurntable
$
$
$
$
30cm
10cm
Turntable Rotor
Support Ring
Turntable
Oven Door
Viewing Window
Door Interlocks
Features and Controls
Grill Rack
7.5cm
7.5cm
4

Related product manuals