Trimax Snake Spare Part Instruction

1
SPARE PARTS
INSTRUCTIONS # 49
Date Created: 09/05/2017
Product: Snake
Title: Road Kit Option Fitment
SAFETY! Before attempting to make any adjustments or carry out maintenance on the mower, review
the hazard identification table (section 3a of your Operator Manual) and take all necessary precautions.
Collect the following parts:
2 x Mudguard Mounts
(410-000-247)
2 x Rolled Mudguards
(410-000-245)
2 x Mudguard Clamp Plated
(410-000-246)
8 x M8 x 25 Bolts
8 x M8 Nyloc Nuts
Position the Rolled Mudguards
(410-000-245) as shown.
Insert the M8 x 25 Bolts through the
Mudguard Mounts (410-000-247) and
the Rolled Mudguards
(410-000-245)
Note:
The orientation of the Guards must be
as shown to make a Left and Right-
Hand Assembly.
Position the Mudguard Clamp Plate
(410-000-246) as shown.
Secure with M8 Nyloc nuts.
Fully tighten.
Repeat for the second Mudguard.
Mudguard Mounts

Trimax Snake Specifications

General

Brand	Trimax
Model	Snake
Category	Farm Equipment
Language	English