Grease the Bearing Race in the Hub.
Place the LARGE Tapered Roller
Bearing (401-842-830) in the race.
Apply another coat of grease to the
LARGE Tapered Roller Bearing
Position the Seal Insert (416-860-480)
Gently tap the Seal Insert into place.
See inset.
IMPORTANT:
Ensure the seal insert is fitted
SQUARELY!
Turn the Hub over so that the Wheel
studs face UPWARDS.
Using the same method as the Large
Tapered Roller Bearing Grease the
SMALL Tapered Roller Bearing
(401-842-820) and Bearing race.
To Next Page
Loading...
