Trimble M3 Total Station User Guide 131
Data Formats B
The end of the line has CR, LF (columns 120 and 121, shown here as <=). See also
Special characters, page 132.
1 10 20 30 40 50 60 70 80 90 100 110 121
1234567890123456 78901
234567890123456789012345678 9012 345678901234
6 78901234567890123456789 012345678 90123456789012 345678901
For M5 | Adr . 12345 | T2a . 123456789012345678901234567 | T3 . 12345678901234 . dim3 | T4 . 12345678901234 . dim4 | T5 . 12345678901234 . dim5 | ?<=
Value1 Value 2 Value 3 Value 4 Value 5
For M5 | Adr . 176 | PI1 DDKS S402 4201 | Y 56590.405 m | X 74968.796 m | Z 334.784 m | <=
Column Description
120-121 Carriage Return <, Line Feed =
119 Blank field, in case of error “e“
114-117 Unit for block5
99-112 Block5 value block
96-97 Type identifier5 for block5
91-94 Unit for block4
76-89 Block4 value block
73-74 Type identifier4 for Block4
68-71 Unit for block3
53-66 Block3 value block
50-51 Type identifier3 for block3
22-48 Information block PI or TI (point identification PI or text information TI,
TO etc.)
18-20 Type identification2 PIa (a=1-0, for 10 Markings) or TI
12-16 Memory address of data line
8-10 Type identifier1 Adr for address
1-6 Defines M5 format
To Next Page
Loading...