Need help?Do you have a question about the Trimble S and is the answer not in the manual?
General| Brand | Trimble |
|---|---|
| Model | S |
| Category | Measuring Instruments |
| Language | English |
Minimizes risk of personal injury or damage to the instrument by following CAUTIONS.
Precautions to prevent static damage to semiconductor devices in the instrument.
Information on Class I, II, and IIIa laser products and safe use of lasers.
Details on the Trimble S3 Total Station, its technology, and service aspects.
Overview of the Trimble S6 Total Station, MagDrive technology, and MultiTrack Target.
Information on the Trimble S8 Total Station's advanced capabilities for engineering applications.
Summary table of existing Trimble S3/S6/S8/VX/SPS/RTS released instruments.
Refers to datasheets for model-specific product specifications available on www.trimble.com.
Explains the basic parts of the instrument and their functional relationships.
Describes the main board's functions in firmware storage, power supply, and system control.
Details the MagDrive servo technology for precise angle and servo control.
Explains the optical principle of the angle sensor using glass discs with code patterns.
Explains the pulsed laser EDM for distance measurement using time-of-flight.
Covers the use of passive and active targets for monitoring surveys with advanced tracking.
Lists software units in the Trimble S6 and their respective locations.
A software function to display instrument sensor status and perform simple tests.
A flowchart to guide service technicians in troubleshooting and repairing instruments.
Addresses symptoms and resolutions for horizontal and vertical vibration in the angle and servo system.
Provides resolutions for distance measurement issues like out of tolerance or general distance problems.
Details symptoms and resolutions for tracker issues related to software, electrical, and mechanical aspects.
Instructions for replacing the locking screw and handle parts.
Procedures for replacing the servo side cover, KNB board, and trigger key.
Details on replacing the IPC board, including cable disconnections and mounting.
Procedures for tracker receiver alignment and replacement of related boards.
Instructions for upgrading a Servo instrument to Autolock via hardware and software.
Steps for upgrading a Servo/Autolock instrument to Robotic by replacing side covers and software.
Procedures for updating instrument firmware and registering the correct PASS driver.
Steps for preparing and aligning the instrument and collimator for fibre adjustments.
Procedures for determining and adjusting reticle collimation, tracker receiver collimation, and reference angles.
Calibration process for the Auto focus function, including light barrier checks and focus tests.
Covers tracker receiver alignment, board replacements, and transmitter alignment.
Checklists for after service/repair and delivery tests for various Trimble models.
Outlines the three main categories of the PASS software: Analyse, Maintenance & Service, and Final Test & Report.
Instructions on connecting the instrument to a PC using PASS service software and necessary cables.
Exploded view and parts list for the Horizontal Turning Unit.
Exploded view and parts list for the Servo Side Cover assembly.
Exploded view and parts list for the Battery Side Cover assembly.
Exploded view and parts list for the TCU Attachment with USB.
Lists various tools required for maintenance and calibration, with part numbers.
Information on prisms for baselines and recommended targets for EDM offset determination.
To Next Page