Trimble S - Software configuration key installation; Set configuration key

Chapter 6
Adjustment and verification
P/N 57150002, Revision 5.0 6 - 201 Trimble S, VX, SPS & RTS Service Manual
F
Software configuration key installation
There are two software configuration key in the instrument. See page 3-54 for more information.
Set configuration key
This option is available in PASS release 1.8.0 and higher
Performance
Item Performance Description Result Notes
1 Start up instrument /
PASS.
See page 7-3 how to set-
up the instrument.
2 Start Set configuration
number module.
A. Select
Set
Configuration number
from Update in
Maintenance & Service.
B. Click
Connect button.
The current
configuration
numbers are
displayed.
Fig. 6-208 Service interval
3 Install configuration
numbers.
A. Type in the new
configuration
numbers.
B. Click
Store
configuration
button.