Trimble S - Determination of tracker receiver collimation “ct” and “it”

Chapter 6
Adjustment and verification
Trimble S, VX, SPS & RTS Service Manual6 - 38 P/N 57150002, Revision 5.0
F
Determination of tracker receiver collimation “ct” and “it”
Performance
Item Performance Description Result Notes
1 Start up instrument /
PASS.
See page 7-3 how to set-
up the instrument.
The tracker system
has to working in
order to determine
the receiver
collimation.
2 Start the test. Select
Check tracker
function/Crosstalk
from
Tracker in Maintenance &
Service
, see Fig. 6-27 on
page 6-38 .
Fig. 6-27 Check tracker function/crosstalk
3 Start tracker test. Select
Tracker test check
box and click
Start.
EDM transmitter will be
switch off.
The tracker test bench will
appear, see Fig. 6-28 on
page 6-39 .