Trimble S - FineLock upgrade; Hardware upgrade; Software update

Chapter 5
Maintenance and Repair
Trimble S, VX, SPS & RTS Service Manual5 - 142 P/N 57150002, Revision 5.0
F
FineLock upgrade
• Hardware upgrade
• Software update
This instruction is used when upgrading with FineLock option.
Hardware upgrade
No hardware update is needed.
Software update
A software configuration key is needed to activate the FineLock option.
Tools and equipment
Performance
Description Part number
PASS Service Software
Upgrade FineLock S8 U5003
Item Performance Action Results Notes
1 Set up instrument Connect instrument to PC
and power supply. Start
instrument and PASS
Service Software
2 Start Set
Configuration
number.
Select
Set Configuration
number
from Update in
Maintenance & Service.