Trimble S - Autolock upgrade; Hardware upgrade; Software upgrade

Chapter 5
Maintenance and Repair
P/N 57150002, Revision 5.0 5 - 135 Trimble S, VX, SPS & RTS Service Manual
F
Autolock upgrade
• Hardware upgrade
• Software upgrade
This instruction is used when upgrading a Servo instrument to an Autolock instrument. The upgrade
is done in two steps, a hardware upgrade and a software update.
Hardware upgrade
The hardware update consists of replacing cover objective and cover behing eyepiece from dark grey
to silver.
Software upgrade
A software configuration key is needed to activate the Autolock function.
Tools and equipment
Performance
Description Part number
Autolock upgrade kit See price list
Cover objective (silver) 79605001
Cover behind eyepiece (silver) 79639001
Item Performance Action Results Notes
Hardware upgrade
1 Replace cover
objective and cover
behind eyepiece from
dark grey to silver.
A. Remove Cover
objective, use a flat
screw driver see Fig. 5-
127 on page 5-136 .
B. Mount Cover objective
(silver).
C. Replace cover behind
eyepiece.
Servo instruments has
dark grey cover
objective and cover
behind eyepiece.