Chapter 1
General Information and safety
P/N 57150002, Revision 5.0 1 - 5 Trimble S, VX, SPS & RTS Service Manual
F
General Safety
This manual contains certain CAUTIONS, which should be carefully read and followed to minimize
risk of personal injury or damage to the instrument. The lack of cautions with respect to specific
service methods does not mean there are no safety risks involved. The following safety rules have to
be observed:
Note – provides information necessary to properly complete a procedure or information, which will
make the procedure easier to understand.
C
Caution – indicates a special procedure or special steps that must be taken in the course of
completing the procedure in which the caution is found. These special procedures are necessary
to avoid damage to the assembly on which work is being done.
C
Warning – indicates a special procedure or special steps that must be taken in the course of
completing the procedure in which the warning is found. These special procedures are
necessary to avoid injury to the person performing the procedure.
To Next Page
Loading...
Need help?
General
