Trimble S - Replacement of Transceiver board; Replacement of Switch motor; Replacement of Greywedge motor; Replacement of EDM Frame unit

Chapter 5
Maintenance and Repair
P/N 57150002, Revision 5.0 5 - 109 Trimble S, VX, SPS & RTS Service Manual
F
Replacement of Transceiver board
Replacement of transceiver board follows the same procedure as for Trimble S6 Total Station with
High Precision/DR Standard distance units, see page 5-109.
Replacement of Switch motor
Replacement of switch motor follows the same procedure as for Trimble S6 Total Station with High
Precision/DR Standard distance units, see page 5-97.
Replacement of Greywedge motor
Replacement of greywedge motor follows the same procedure as for Trimble S6 Total Station with
High Precision/DR Standard distance units, see page 5-109.
Replacement of EDM Frame unit
Replacement of EDM frame unit follows the same procedure as for Trimble S6 Total Station with
High Precision/DR Standard distance units, see page 5-101.