Trimble S - Tilt sensor offset

Chapter 6
Adjustment and verification
P/N 57150002, Revision 5.0 6 - 29 Trimble S, VX, SPS & RTS Service Manual
F
Tilt sensor offset
Performance
Item Performance Description Result Notes
1 Start up instrument
connecting MSB
board cables.
See page 7-3 how to set-
up the instrument.
2 Run the software. A. Select Tilt sensor offset
in Final Test & Report.
B. Follow instructions:
Step 1 - Connect an
internal battery.
Step 2 - Level
instrument.
Step 3- Instrument will
measure X- and Y-
level in eight positions
around the circle.