Trimble S - Initialize instrument data

Chapter 6
Adjustment and verification
P/N 57150002, Revision 5.0 6 - 7 Trimble S, VX, SPS & RTS Service Manual
F
Initialize instrument data
Performance
Fig. 6-2 Save IPC board data
4 0.5” / 1” instruments
only - Save HTU file.
A. Save the HTU file in
C:\PASS\Constants\H
orizontal Turning Unit
folder.
B. Click
OK button to
verify file saved.
5 Exit software. Click
OK to Exit.
Item Performance Description Result Notes
1 Start up instrument /
PASS.
See page 7-3 how to set-up
the instrument.
2 Start software. Select
Initialize instrument
with constants
from
Instrument data in
Maintenance & Service
.
Item Performance Description Result Notes