Trimble S - Page 344

Chapter 6
Adjustment and verification
Trimble S, VX, SPS & RTS Service Manual6 - 8 P/N 57150002, Revision 5.0
F
3 Select constant file. A. Click Read constants
from a file(s)
button.
B. Select constant file.
C. Click
Open button.
Fig. 6-3 Select instrument constant file for initialization
4 0.5” / 1” instruments
only - select HTU file.
A. Select HTU file.
B. Click
Open button.
Fig. 6-4 0.5” / 1” INSTRUMENTS ONLY - Select HTU file for initialization
Item Performance Description Result Notes