7 Coordinates
78 Trimble M3 Total Station User Guide
When you press [F2] in the previous screen, a
scale input screen appears.
14. To display a previously used scale value, press
[F3]
Stack.
After the scale has been confirmed, the station
coordinates are recalculated. When this has been done,
the residuals can be evaluated again.
Stored resection data
The following resection data is stored in internal memory and is available for
download:
• Mode designation
• Point numbers and code
• Backsight points A, B, C, D, E, F, G, H, I, J
• Y, X, and Z coordinates
• SD, HA, and VA readings
• vy, vx, and vz backsight point residuals (M5 format only)
• Y, X, and Z coordinates of the station point (S)
• Scale and circle orientation, m, Om (M5 format only)
• Standard deviation of the weight unit, s0 (M5 format only)