Trimble R1 Quick Start Guide

Trimble
®
R1 GNSS Receiver
©2015. Trimble Navigation Limited. All rights reserved. This product is protected by US
and international copyright, trademark, and patent law as described in "Legal Notices"
in the Trimble R1 GNSS Receiver User Guide.
PN 100230-00-ENG, Revision B (02/2015)
Trimble Navigation Limited
10368 Westmoor Drive
Westminster, CO 80021
USA
www.trimble.com
Trimble Support
S
U
P
P
O
R
T
T
R
I
M
B
L
E
http://www.trimble.com/locator/locator.aspx
TRIMBLE R1 GNSS RECEIVER
QUICK START GUIDE
4
*100230-00-ENG*
Made for
• iPhone 6 Plus, iPhone 6
• iPhone 5s, iPhone 5c, iPhone 5
• iPad Air, iPad Air 2
• iPad mini with Retina display
• iPad (4th generation)
• iPad mini
Download Trimble GNSS Status utility
If you are not using Trimble field software, use the Trimble GNSS Status
utility to configure the receiver for use with applications that accept NMEA
messages. Download from:
• Windows, Windows Embedded Handheld: www.trimble.com
• Android: Google Play store
• iOS: iTunes
“Made for iPhone,” and “Made for iPad” mean that
an electronic accessory has been designed to connect
specifically to iPhone or iPad, respectively, and has
been certified by the developer to meet Apple
performance standards. Apple is not responsible for
the operation of this device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with iPhone or iPad may affect
wireless performance.

Trimble R1 Specifications

General

Receiver Type	GNSS
GNSS Signals Tracked	GPS, GLONASS, Galileo, BeiDou, QZSS
Channels	44
SBAS	Yes
Data Logging	Yes
Bluetooth	Yes
Wi-Fi	No
Weight	187 g (6.6 oz)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
IP Rating	IP65
Connectivity	Bluetooth
Dimensions	11.2 cm x 6.8 cm x 2.7 cm (4.4 in x 2.7 in x 1.1 in)