Trimble R10 - Receiver Status menu; Satellites menu; Data Logging menu; Receiver Configuration menu

TrimbleR10ReceiverWebHelp
 MozillaFirefox(version1.50orlaterisrecommendedforWindows,Macintosh,andLinux
operatingsystems)
 MicrosoftInternetExplorerforWindowsoperatingsystems
 Opera
 AppleSafari
ToaccessthewebinterfaceonaSPS985smartantennausingaPDAorasmartphonewiththe
Wi‐Fi
linktotheSPS985smartantenna,Trimblerecommends:
 OperaMobileforAndroid‐basedunits
 AppleSafari

Thefollowingconfigurationmenusareava ilable.
ReceiverStatusmenu
TheReceiverStatusmenuprovidesaquicklinktoreviewthereceiver’savailableoptions,current
firmwareversion,IPaddress,temperature,runtime,
satellitestracked,currentoutputs,available
memory,positioninformation,andmore.
Satellitesmenu
UsetheSatellitesmenutoviewsatellitetrackingdetailsandenable/disableGPS,GLONASS,and
SBASsatellites.
{b}Note–{/b}ToconfigurethereceiverforOmniSTAR,usetheOmniSTARmenu.
DataLoggingmenu
UsetheDataLoggingmenuto
setupthereceivertologstaticGNSSdata.Thismenuisavailable
onlyifthereceiverhastheDataLoggingoptionenabled.Youcanalsoconfiguresettingssuchas
observablerate,positionrate,continuouslogging,continuousloggingrate,andwhethertoauto
deleteoldfilesifmemoryislow.
Receiver
Configurationmenu
UsetheReceiverConfigurationmenutoconfiguresuchsettingsaselevationmaskandPDOPmask,
theantennatypeandheight,thereferencestationposition,andthereferencestationnameand
code.
I/OConfigurationmenu
UsetheI/OConfigurationmenutosetupalloutputsofthereceiver.Depending
onthereceiver's
specificationitmayoutputCMR,RTCM,RTCM‐REPEAT,RT17/RT27,NMEA,GSOF,orBINEX
messagesonavarietyofportsincludingTCP/IP,NTRIP,UDP,serial,.