Trimble R10 - Bluetooth menu; OmniSTAR menu

TrimbleR10ReceiverWebHelp
Bluetoothmenu
UsetheBluetoothmenutoconfigurethereceivertoconnecttootherdevicesthatuseBluetooth
wirelesstechnology.Thesedevicescanbeusedtoconfigurethereceiver,andgenerateorreceive
corrections.
ThefollowingTrimbledevicescanbeconnectedtothereceiverusingBluetoothwireless

technology:
 TSC3controller
 TrimbleTablet
 OtherBluetooth‐enableddevices
Radiomenu
UsetheRadiomenutoconfiguretheinternalradioofthereceiver,ifapplicable.Thereceiversare
availablewith410MHzto430MHz,or900MHzradios.
GSM/GPRSmodemmenu
[pleaseprovidetext]
OmniSTARmenu
ThereceivercanreceiveOmniSTARcorrections.
ToreceiveOmniSTARcorrections,youmustenablethereceivertotrackOmniSTARsatellitesandit
musthaveavalidOmniSTARsubscription.
ToobtainanOmniSTARsubscriptionorcont actsupport,goto
www.omnistar.com/servicemap.html
.
NetworkConfigurationmenu
UsetheNetworkConfigurationmenutoconfigureEthernetsettings,emailalerts,PPPconnection,
HTTPport,andFTPportsettingsofthereceiver.ForinformationontheEthernetsettings,see
ConfiguringEthernetsettings
.
Wi‐Fi
UsetheWi‐FimenutoconfiguretheWi‐Fiaccessmodeandaccesspoint,sothatusingaWi‐Fi
enableddevicesuchasasmartphone,youcanaccessthewebinterfaceofaSPS985smartantenna.
Wi‐FiClientmenu
[pleaseprovidetext]
Wi‐FiAccessPointmenu
[pleaseprovidetext]