1-6 Getting Started
Turning Off
To turn off the tablet computer, use the ―Shut Down‖ command of your
operating system.
CAUTION: Wait for at least five seconds after turning off the tablet computer before
turning it back on.
When you finish a working session, you can stop the tablet computer by
using the Vista Shut Down command, or leaving the tablet computer in
Sleep or Hibernation mode:
Shutdown the tablet computer as you would a regular PC
running Vista. (Use the Windows Start Menu in the lower
left and follow the shutdown procedure.)
You can force the tablet computer to turn off by pressing and
holding the power button for more than 6 seconds. (This is
not the recommended method for turning off your tablet
computer, but may be necessary if the system is locked up.)
Press the power button for less than 4 seconds or use the
Windows Start Menu to put the unit in Hybrid Sleep mode.
Use the Windows Start Menu to put the tablet computer in
hibernation mode.
Press the power button to resume or turn on the tablet computer from any
of these modes. (See ―Power Management‖ in Chapter 3 for more
information.)
NOTE: By configuring in the BIOS Setup Utility, you can have the tablet computer
automatically start up or resume when external AC power is plugged in. (See
“Advanced Menu” in Chapter 5 for information.)
To Next Page
Loading...