2-22 Operating Your Tablet Computer
Camera Switch
Tap this button to switch between two camera modules (The Front
Camera - 1.3 M and the Back Camera - 2 M – if available). If
using the 1.3 M module, only the following buttons are available: GPS
Info, Continuous, Self Timer, Image Size, Display, Folder Location, and
Shutter Sound. All the other buttons are grayed-out. The 1.3 M module
does not support 1600×1200 image size. When using the 2 M module
(default), all the buttons are available. When switching from 2 M module
in 1600×1200 image size to 1.3 M module, the image size will be
changed automatically to 1280×1024
The settings for Camera and Camcorder mode should be synchronous.
Macro
Tap this button and then choose Enable or Disable (default). Selecting
Enable allows G-Camera to obtain the correct focus on a subject without
requiring you to adjust the focus manually. This function is applicable for
taking pictures where the subject is only a short distance from the camera.
The following icon appears in the preview image when Macro is enabled:
.
Night Mode
Tap this button to set the light compensation in different lighting
conditions. Select Enable when using G-Camera in an environment where
light source is weak. Select Disable (default) when using G-Camera in an
environment with adequate lighting. The following icon appears on the
preview image when Night Mode is enabled: .
To Next Page
Loading...