Triner Scale TS-700 Series - Operation; Keypad Operation Details

Calibration & Connectivity | TS-700 Series
9
PARAMETER FUNCTION OPTIONS
C01 Default weighing
unit
1 = kg
2 = lb
Description:
With C01 flashing, press the
key, then use the up or
down arrow keys to change
the parameter setting as
needed.
Press the
key to accept
the setting and continue on
to the next parameter.
C02 Decimal location 0 = none
1 = one decimal place
2 = two decimal places
3 = three decimal places
Description:
With C02 flashing, press the
key, then use the up or
down arrow keys to change
the parameter setting as
needed.
Press the
key to accept
the setting and continue on
to the next parameter.