Press Cylinder.
User Care & Maintenance.
1. Clean smudges on Press Cylinder and Badge with a wet microfibre cloth, then quickly dry.
2. Ensure Timber Press Top is regularly dried to ensure longevity.
3. Stow Press Cylinder in Brew Chamber when not in use, or position upside down on bench.
4. Always stow securely in Brew Chamber and avoid opportunities for Press Cylinder to roll on flat surface.
5. As noted in safety instructions, avoid dropping and do not misuse Press Cylinder.
Timber Press Top
American Black Walnut
Heartwood Timber
Press Badge
Machine Punched Logo
304 Stainless Steel
Press Tip
Connect to Press Cap for creating
air-tight pressure seal against
Brew Chamber wall
To Next Page
Loading...
