Need help?Do you have a question about the Trinity ONE and is the answer not in the manual?
General| Brand | Trinity |
|---|---|
| Model | ONE |
| Category | Coffee Maker |
| Language | English |
Instructions for safely unlocking the filter housing, noting the use of the left hand for the press cylinder.
Warning about potential hot surfaces on the Flow Controller and Filter Housing at all times.
Caution regarding the weight of the Press Cylinder and the risk of injury from dropping or misuse.
Awareness of boiling water and heated components during the brewing process.
Instructions for cleaning and storing the Press Cylinder, including drying the Timber Press Top for longevity.
Details of the Press Cylinder parts: Press Tip, Timber Press Top, and Press Badge.
Cleaning stainless steel surfaces and drying the timber handle of the Filter Housing for longevity.
Information on tightening the hub screw using a 2.5mm hex key (not included).
Cleaning instructions for the Brew Chamber and Stand, emphasizing gentle cleaning methods.
Maintaining air gap and avoiding spills around the Brew Chamber's conical opening.
Maintaining air gap for the Y-Seal and cleaning the Press Cap with a soft sponge.
Description of the Dosing Tool's 22g capacity and its marking for preference.
To Next Page
