You will need a Phillips screwdriver for assembly. A rubber mallet is also recommended.
Note: There are two options for installation:
1) In cabinet – go to page 2-3
2) On wire rack – go to page 4-5
PARTS LIST
1
WIRE DRAWER (1)
A
LEFT SLIDE (1)
B
RIGHT SLIDE (1)
C
D
F
PLATE
SCREW (4)
G
CABINET
SCREW (4)
CABINET MOUNTING
TEMPLATE (1)
RACK PLATE (4)
E
Used when installing in cabinet
Used when installing on wire
rack
Your Sliding Wire Drawer should include the following parts. Please inspect box contents
to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact
Customer Service. Parts can also be requested online at our customer center.
To Next Page
Loading...