Page | 8
ONLINE: TRINITYAPPLIANCES.COM.AU
If the power supply cable is damaged, it must be replaced by its manufacturer or
authorized technical service or any other personnel qualified at the same level.
Appliance is equipped with a type ‘’Y’’ cord cable.
Make sure the plug is inserted firmly into wall socket to avoid sparks.
Do not use steam cleaners for cleaning the appliance, otherwise electric shock may
occur.
An omnipolar switch capable to disconnect power supply to the appliance is
required for installation. Disconnection from power supply shall be provided with a
switch or an integrated fuse, circuit breaker installed on fixed power supply according
to wiring regulations and building code.
To Next Page
Loading...
