Need help?Do you have a question about the Trio JR900 and is the answer not in the manual?
Covers FCC Part 15 compliance, approved antennas, and RF exposure requirements.
Safety and installation guidelines for Class I, Division 2 hazardous locations.
Details adaptable Ethernet interfacing, HTML web server, and network security features.
Discusses rugged design, hazardous environment certification, and trusted access control.
Explains the part number matrix and options for ordering J, K, & O Series radios.
Describes PTP networks with one Access Point and one Remote radio for optimal bandwidth.
Details PTMP networks for broadcasting to multiple remote sites efficiently.
Explains PTMP networks using KwikStream repeaters for extended RF coverage.
Describes extending PTP range using dual antenna LinkXtend bridges for greater flexibility.
Discusses PTMP range extension capabilities using LinkXtend bridges.
Details ChannelShareâ„¢ for collision avoidance and No Ack Retries for reliability.
Discusses security layers, trusted access, and 256-bit AES encryption.
Features for network redundancy, naming, AP failover, bridges, roaming, and hybrid networks.
Step-by-step guide to configure J-Series radios for a PTP Ethernet link.
Using wizards to configure Access Point and Remote for PTP links.
Repeating wizard steps for the Remote radio configuration.
Guide for setting up PTP serial links using TCP for reliable data delivery.
Guide for setting up PTP serial links using UDP for low latency and high throughput.
Configuring PTMP serial links using UDP multicast for efficient communication.
Configuring PTMP serial links with peer-to-peer using UDP multicast.
Aligning directional antennas using RSSI measurements for best received signal.
Ensuring adequate RSSI levels for reliable communication and system operation.
Testing radio communication links by transmitting and analyzing data packets.
Detailed steps for connecting and uploading firmware via the web browser interface.
Explains the upload, storing, and activation phases of the firmware update.
Covers FCC Part 15 compliance, approved antennas, and RF exposure requirements.
Safety and installation guidelines for Class I, Division 2 hazardous locations.
Details adaptable Ethernet interfacing, HTML web server, and network security features.
Discusses rugged design, hazardous environment certification, and trusted access control.
Explains the part number matrix and options for ordering J, K, & O Series radios.
Describes PTP networks with one Access Point and one Remote radio for optimal bandwidth.
Details PTMP networks for broadcasting to multiple remote sites efficiently.
Explains PTMP networks using KwikStream repeaters for extended RF coverage.
Describes extending PTP range using dual antenna LinkXtend bridges for greater flexibility.
Discusses PTMP range extension capabilities using LinkXtend bridges.
Details ChannelShareâ„¢ for collision avoidance and No Ack Retries for reliability.
Discusses security layers, trusted access, and 256-bit AES encryption.
Features for network redundancy, naming, AP failover, bridges, roaming, and hybrid networks.
Step-by-step guide to configure J-Series radios for a PTP Ethernet link.
Using wizards to configure Access Point and Remote for PTP links.
Repeating wizard steps for the Remote radio configuration.
Guide for setting up PTP serial links using TCP for reliable data delivery.
Guide for setting up PTP serial links using UDP for low latency and high throughput.
Configuring PTMP serial links using UDP multicast for efficient communication.
Configuring PTMP serial links with peer-to-peer using UDP multicast.
Aligning directional antennas using RSSI measurements for best received signal.
Ensuring adequate RSSI levels for reliable communication and system operation.
Testing radio communication links by transmitting and analyzing data packets.
Detailed steps for connecting and uploading firmware via the web browser interface.
Explains the upload, storing, and activation phases of the firmware update.
To Next Page
General