TRV-35SE
T
hank you for purchasing the TRV-35SE integrated vacuum tube amplifier. Please read this
instruction manual carefully before using your amplifier.
______________________________________________________________________________
I GENERAL INSTRUCTION
! Four EL34 are used for class AB push-pull amplification.
! The toroidal power transformer and EI audio output transformer are specially
manufactured for the TRV-35SE by applying our unique process, which has low
magnetic leakage, wide frequency response, and low impedance.
! Two 12AX7’s and one 12AU7 are used in the preamplifier.
! All-vacuum tube design.
! All hand-made.
______________________________________________________________________________
II SPECIFICATIONS
! Power Output 45W+45W (RMS, 8 ")
! Frequency Response 10Hz~100kHz
! THD 0.1%
! S/N Ratio 90dB
! Input Impedance 100k "
! Output Impedance 6 ", 8 "
! Input Sensitivity 700mV
! Power Requirements ~100V/110V/120V, 50/60Hz
! Weight 15kg
! Dimension 330 # 150 # 280mm (W x H x D)
! Power Consumption 100W
______________________________________________________________________________
III OPENING THE PACKAGE
Please check the carton carefully for damages before you open it. Place it on a flat
surface with the arrow pointing upward, remove the sealed tape, and open the carton. The
following items are included in the box:
o A TRV-35SE amplifier
o An operation manual
o A power supply cord
o Two fuses
To Next Page
Need help?
General
