Need help?Do you have a question about the TRIODE TRV-A300SER and is the answer not in the manual?
Controls the amplifier's power state, ON or OFF.
Where the power cord connects; houses the main fuse.
Step-by-step guide for installing batteries in the remote.
Ensure the unit's ventilation is open for proper cooling.
Protect the appliance from rain and moisture.
Match speaker impedance (6 or 8 ohm) to amplifier terminals.
Turn on the amplifier; the power LED indicates operation.
Verify the power LED remains lit for 30 seconds to confirm function.
Avoid inserting/removing cables during operation to prevent damage.
Wait at least two minutes before switching on again after shutdown.
Check power cord and main fuse if the power LED is off.
Verify volume, signal input, and selection if power LED is on.
Adjust input signal level or turn down volume for distortion.
To Next Page
General
