Triomed COMPACT - Troubleshooting Common Device Faults

TRIOMED COMPACT. USER MANUAL
26
• insertanewCR2032batteryintothebatteryholder
observing the polarity;
• reinstallthetoppanelandfastenittothebottompanel
with the screws.
The level of the battery charge is indicated by the bright-
ness of the LEDs.
The serviceability of the device should be checked
before every use. The normal functioning of the device
is described in Section 4.2 “Structure and functioning”.
10.4. List of possible faults
and suggested remedies
Possible faults and suggested remedies are listed in Table 2.
Table 2
No Signs of a fault Likely reason Remedy
1 The LEDs do not switch
on when the control
button is pressed
The battery
is defective
or has
discharged
Replace the battery.
If following the inser-
tion of a non-defec-
tive battery the device
cannot be switched
on, send it to be re-
paired
2 Lack of sound in the
speakers following
the activation of the
programme
The silent
mode
has been
selected
Select the programme
with sound and acti-
vate the programme
selected (Section 4.2)
If there is no sound,
send the device to be
repaired