Triomed UNIVERSAL - 10.3. Preparing the device for use; CHECKING OF THE SERVICEABILITY OF THE DEVICE:

TRIOMED UNIVERSAL. USER MANUAL
23
To replace the batteries slide the lid to the side at the
back of the power unit, take the lid o, extract the old bat-
teries and insert the new ones observing the polarity in
accordance with the marking on the body of the devices
and on the batteries.
The level of the battery charge is indicated by the bright-
ness of the indicator. The lack of light or sound signals
means that the device is broken or that the batteries are
empty. In this case please check the batteries and replace
them if necessary. If the device is broken, please contact
the seller for inspection and/or repair.
CHECKING OF THE SERVICEABILITY OF THE DEVICE:
• connecttheradiatortothepowerunitusingtheUSBca-
ble. The device will switch on and the indicator will show
the number of radiator programme;
• pressthecontrolbutton.Theradiationwillturnon,the
beeper will produce sound, the indicator will show the
duration of the session in seconds and the countdown
will begin. The LED on the radiator will turn on .
• pressthecontrolbuttonagainnotwaitinguntiltheend
of the session. The indicator will show zeros in all its sec-
tions, the beeper will switch o and the LED on the radi-
ator will turn o. The indicator will turn o in 10 seconds
and the device will switch o.