Do you have a question about the Triple S JAGUAR 20R and is the answer not in the manual?
Outlines manual's purpose, scope, and usage guidance.
Instructions for proper storage and care of the owner's manual.
Guidance on using authorized parts and qualified personnel for maintenance.
Statement on the manufacturer's right to make product changes without notice.
Defines suitable uses and environments for the floor scrubber.
Information on recording machine model and serial number for reference.
Procedures for safe transport and inspection upon receipt.
Explains safety symbols (Danger, Warning, Caution, Note, Consultation).
Crucial safety precautions for operating the machine safely and preventing harm.
Detailed breakdown of the machine's physical components and their locations.
Overview of the machine's control panel and its buttons/indicators.
Explains the messages and codes shown on the machine's LED display.
Describes the meaning of indicator lights on the battery charger.
Lists key technical specifications, dimensions, and performance data.
Visual representation of the machine's electrical wiring and components.
Step-by-step guide for installing and configuring new machine batteries.
Procedures for setting battery type (WET or GEL/AGM) for proper operation.
How to activate the emergency stop function to halt machine operation immediately.
Instructions for correctly attaching and removing brushes or pads.
Steps to ensure the squeegee makes proper contact with the floor for effective drying.
Guide on how to fill the solution tank with cleaning fluid.
Checks to ensure the drive motor is functioning correctly before operation.
Procedures for safely starting up and shutting down the floor scrubber.
Detailed steps for operating the machine for cleaning and drying floors.
Information on monitoring battery status and charging during operation.
Procedures for draining and cleaning the dirty water recovery tank.
Instructions for emptying and rinsing the clean water solution tank.
A schedule outlining required maintenance tasks and their frequency.
Guidelines and procedures for charging the machine's batteries.
Instructions for cleaning the brushes and pads after use.
Steps for cleaning the solution filter to ensure proper fluid delivery.
Procedures for cleaning the squeegee for optimal drying performance.
How to inspect squeegee blades for wear and replace them when needed.
Steps for cleaning the recovery tank, vacuum grid, and related components.
Details on error codes related to the drive motor and their possible causes.
An overview of all parts constituting the entire machine assembly.
Lists components for the machine's structural frame and protective bumpers.
Details the parts included in the front wheel system.
Lists components for the drive motor and rear wheel systems.
Components related to steering and directional control.
Parts associated with the main structural frame at the front of the machine.
Components that make up the housing for the control panel and electronics.
Detailed list of parts for the brush system, including motor and deck.
Parts included in the clean water solution tank and its related fittings.
Components related to the battery charger and main electrical systems.
Parts for the dirty water recovery tank, including motors and hoses.
Components that form the mounting bracket for the squeegee.
Lists all parts that constitute the squeegee unit.
Various electrical components and wiring harnesses not covered in other assemblies.
Additional electrical assemblies and wiring kits.
Specific wiring harness for connecting motor speed controllers.
The primary wiring harness connecting major machine systems.
Common parts prone to wear that may require periodic replacement.
A visual schematic of the machine's complete electrical wiring system.
| Brand | Triple S |
|---|---|
| Model | JAGUAR 20R |
| Category | Floor Machine |
| Language | English |
Loading...