Triple S PANTHER 15B - User Manual

Questions and Answers

K
Kaylee CarrJul 30, 2025
Why is the suction power insufficient in my Triple S PANTHER 15B Floor Machine?
- R
  Ruth MccarthyJul 30, 2025
  There are several reasons for insufficient suction power in your Triple S Floor Machine: * The recovery tank might be full, so empty it. * The hose could be disconnected from the squeegee; ensure it is connected. * The vacuum assembly might be clogged, requiring cleaning or inspection. * The squeegee might be dirty, or the blades could be worn or damaged; clean and check it. * The recovery tank might not be locked; lock the latch. * The tank cover might not be properly closed, or the gasket could be damaged; properly close the cover or replace the gasket. * The squeegee adjustment piece might not be set correctly; adjust the screw nut to the appropriate position.
J
jimmy98Aug 3, 2025
How to troubleshoot a Triple S PANTHER 15B that doesn't turn on and the indicator light (51) is off?
- J
  Johnny MarshallAug 3, 2025
  If your Triple S Floor Machine isn't working and the indicator light is off, check the following: * Ensure the battery connector is connected. * Charge the batteries if they are completely discharged. * Make sure the power line is connected to a power source.
B
bradley72Aug 7, 2025
What to do if the solution flow is insufficient in my Triple S PANTHER 15B?
- G
  gutierrezandrewAug 7, 2025
  If the solution flow is insufficient in your Triple S Floor Machine, consider these possibilities: * The solution tank may be empty; if so, fill it. * The solution flow control valve might be blocked; clean the valve. * The solution could be dirty; empty the solution, clean the tank, and refill with clean solution.
N
Nichole HaynesAug 11, 2025
Why is the indicator light (51) on my Triple S PANTHER 15B Floor Machine red, and the machine isn't working?
- M
  Michele GomezAug 11, 2025
  If the indicator light on your Triple S Floor Machine is red and the machine isn't working, the batteries are likely discharged. Charge the batteries.
B
Billy PalmerAug 16, 2025
What causes the brush indicator lights (52) to flash on a Triple S PANTHER 15B Floor Machine, and the brush motor doesn't work?
- T
  Taylor TateAug 16, 2025
  If the brush indicator lights are flashing and the brush motor isn't working on your Triple S Floor Machine, it could be due to: * The deck motor being overloaded; use less aggressive brushes suitable for the floor you're cleaning. * Foreign materials preventing the brush from rotating; clean the brush hub.
B
Benjamin RobertsAug 20, 2025
What should I do if the brush motor of my Triple S PANTHER 15B Floor Machine doesn't work and the brush indicator light (52) doesn't turn on?
- S
  Stephanie ArnoldAug 20, 2025
  If the brush motor isn't working and the brush indicator light (52) doesn't turn on, the PCB or key board is likely faulty. Change the PCB or key board.
M
Michael BlackburnAug 25, 2025
Triple S PANTHER 15B: vacuum motor indicator light (53) is off and vacuum system motor doesn't work - what could be the issue?
- A
  Amber RodriguezAug 25, 2025
  If the vacuum system motor isn't working and the vacuum motor indicator light (53) is off, the PCB or key board is likely faulty. Change the PCB or key board.