9
BEFORE YOU BEGIN
Before using the TriPollar Pose VX device, perform the following:
1. Open the box containing the device, remove the device and power supply.
2. Connect the power supply to the device (FIG.7).
3. Plug the power supply into an electrical outlet (FIG.8).
4. Remove the preparation gel from its box.
5. Remove the protective cover from the device.
Important:
Before using the device for the first time perform a patch test 24 hours prior to use:
Apply a small amount of preparation gel to the inner arm, and treat the area with TriPollar Pose
VX device. Ensure that the skin does not have a negative reaction to the gel or to the treatment.
HIGH
MID
LOW
FIG.7 FIG.8
To Next Page
Loading...
