3
Product Features
• Extends a 4K (3840 x 2160) @ 60 Hz 4:4:4 signal up to 328 ft.
(100 m) from the source
• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable
• Additional HDMI port on the transmitter unit features multi-resolution
support and allows the connection of a local monitor.
• Remote receiver unit features built-in equalization (EQ) control and
auto EDID image adjustment
•
Includes mounting hardware that allows both the local transmitter and
remote receiver units to be wall-mounted, rack-mounted or pole-mounted
• Supports up to 7.1-channel surround sound audio
• HDMI 2.0 and HDCP 2.2 compatible
• Plug and play—no software or drivers required
Disclaimer
Before installation, please check the following settings of your source(s)
and TV/monitor(s):
1. Set to display 60 Hz. Double-check factory settings, as default can
be set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4.
3. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note: If you wish to connect a local monitor to your installation, depending
on your TV/monitor make/model, the UHD Deep Color setting may need to be
disabled on your local TV/monitor to achieve 4K 60 Hz resolution.
To Next Page
Loading...
Need help?
General
