33
Troubleshooting continued
10. Check your cabling for any damages that may have occurred during
installation. If a cable connector is loosened from pulling through
ceilings/walls,orthecablejacketisdamagedcausingthewiringtobe
exposed, you will not be able to achieve maximum performance.
11. Are the transmitter, repeater and/or receiver units located in an
area that exposes them to elevated temperatures? If the product is
overheating, it will not function properly.
12. Are you using a VGA to DVI adapter with this product? If so, you will
need to have it connected to a DVI source or monitor that supports
both Analog and Digital signals. If your DVI source or monitor supports
DVI-D digital signals only, you will not be able to convert it to VGA.
13-04-119-93-3289.indd 33 4/26/2013 2:00:26 PM
To Next Page