Tripp Lite NetDirector B022-U08-IP - Page 11

11
5. Installation
(
continued
)
5.6.4 Non-Browser Clients
(
continued
)
6. Click the Remote View button to initiate a remote session, which will
openwiththeremoteOSDdisplayed.TheremoteOSDcontains
mostofthefeaturesthatarecontainedintheWebManagement
Interface, but it is presented in a different format (See the Remote
OSD section for details on the difference between it and the Web
ManagementInterface).
7. Click on the Administration tab at the top of the screen. On this
page, click on the Network Icon to pull up the Network page.
From here, a fixed IP address can be assigned in the same way as
whenusingawebbrowser(Seesteps5through8intheBrowser
section).