To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite NGS8C2 and is the answer not in the manual?
General| Data Transfer Rate | 10/100/1000 Mbps |
|---|---|
| Switching Capacity | 16 Gbps |
| Jumbo Frame Support | 9KB |
| Form Factor | Desktop |
| Power over Ethernet (PoE) | Yes |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3x |
| PoE Standard | IEEE 802.3af |
| Mounting | Desktop |
| Weight | 0.5 kg |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% RH (non-condensing) |
| Ports | 8 x RJ45 |
Instructions for optimal placement, environment, and ventilation for network switches.
Guidelines for safe and correct power and network cable connections to the switch.
Details on Gigabit Ethernet ports, SFP ports, and their status LEDs.
Description of the Console port for CLI access and the Reset button for factory resets.
Information on AC power input and the grounding lug for secure installation.
Steps to install the switch on a flat surface, including rubber feet and power connection.
Steps for mounting the switch in a 1U rack using brackets and user-supplied hardware.
Guide to accessing the switch's web-based management interface via a browser.
Information on TRIPP LITE's warranty terms, limitations, and service procedures.
Instructions and benefits of registering the Tripp Lite product online.
Details on FCC Class A compliance and identification numbers.
