Tripp Lite NGS8C2 User Manual

5
Installation
Desktop Installation
FLAT DESKTOP SURFACE
1
3
4
2
2
Connect the power supply to the switch.
The Power LED will illuminate when the
switch powers on.
3
Ensure adequate ventilation around the
switch for proper cooling.
4
Connect network cables to the network
switch.
1
Attach the four included rubber feet to
the bottom of the unit. Place the switch
on a flat desktop surface. Inspect and
install the power adapter to a proper AC
power source.
16-11-344-93368E.indb 5 1/5/2017 10:50:25 AM

Tripp Lite NGS8C2 Specifications

General

Brand	Tripp Lite
Model	NGS8C2
Category	Switch
Language	English