56
7. Administration
(
continued
)
7.4 Log Server
(
continued
)
The List Panel
The List panel contains the following fields:
Field Description
Recording Determines whether the Log Server records log events for the corresponding KVM switch. If this checkbox is checked, the field
displays Recording, and log events are recorded. If this checkbox is not checked, the field displays Paused, and log events are not
recorded for the corresponding KVM.
Note: Even if a KVM is not currently selected, if its Recording checkbox is checked, the Log Server will still record its log events.
Address This is the IP address or DNS name that was given to the KVM switch when it was added to the Log Server.
Port This is the port number that was assigned to the KVM switch when it was added to the Log Server.
Connection If the Log Server is connected to the corresponding KVM switch, this field displays Connected. If it is not connected, this field
displays Waiting. A connection status of Waiting means that the Log Server is not communicating with the KVM, and will not record
its events. This occurs when the Log Server’s MAC address and/or port number have not been set properly. The MAC address and
port for the Log Server computer must be entered into the KVM’s ANMS settings screen. In addition, the KVM’s IP address and port
must be entered when adding it to the Log Server. If the port numbers in the ANMS menu and the Log Server do not match, the two
will not be able to communicate.
Days This field displays the number of days that the KVM’s log events are to be kept in the database before it is eligible for deletion.
Description This field displays the descriptive information entered for the corresponding KVM switch when it was added to the Log Server.
The Event Panel
ThelowerpaneldisplayseventinformationforthecurrentlyselectedKVMswitch.
To Next Page
Loading...
Need help?
General
