Tripp Lite PDUMH15HVAT User Manual

Owner’s Manual
Metered Rack-Mount PDU
with Automatic Transfer Switch
Models: PDUMH15HVAT, PDUMH15HVATNET, PDUMH20HVAT,
PDUMH20HVAT1, PDUMH20HVATNET, PDUMH20HVATS,
PDUMNH20HVAT1
Series Number: AGAC7625
1. Important Safety Instructions 2
2. Installation 4
2.1 Mounting the PDU 4
2.2 Connecting the PDU 4
2.3 Networking the PDU 6
3. Features 7
4. Configuration and Operation 10
4.1 Automatic Transfer Switch 10
5. Warranty and Product Registration 12
Español 13
Français 25
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty

Tripp Lite PDUMH15HVAT Specifications

General

Maximum Load	15A
Number of Outlets	8
Form Factor	1U
Input Plug	NEMA L6-20P
Input Current	15A
Phase	Single-phase
Network Management	Yes
Remote Monitoring	Yes
Remote Control	Yes
Input Frequency	50/60 Hz
Input Voltage	200-240V
Output Voltage	200-240V
Output Capacity	3.6kW
Mounting	Rack
Operating Temperature	0 to 40°C
Operating Humidity	0 to 95% (non-condensing)
Safety Approvals	UL

Summary

Important Safety Instructions

Installation

Mounting the PDU

Instructions for mounting the PDU in 1U rack configurations using four user-supplied screws.

Connecting the PDU

Details the primary and secondary AC power input connections for various PDU models.

Networking the PDU

Guidance for network configuration of PDUs with an installed SNMP card.

Features

Primary Input

Describes the detachable power cords for primary AC input on different PDU models.

Secondary Input Inlet

Details the detachable secondary AC input power cord connections for various PDU models.

Switched Outlets

Outlets that distribute AC power and can be switched On/Off via software control.

Unswitched Outlets

Outlets that receive power from either input source and are not individually switchable.

Digital Load Meter

Displays the total electrical current used by connected equipment in amperes.

Input Voltage Range Select Switch

Allows toggling between 200-208V ('LO') and 220-240V ('HI') voltage ranges.

Network Interface

Enables PDU operation as a managed network device via SNMP, web, SSH, or Telnet.

Input Source Indicator

LEDs indicating whether the Primary or Secondary input is supplying power to the outlets.

Configuration and Operation

Automatic Transfer Switch

Operates as an ATS, providing redundant input power by switching between primary and secondary sources.

Automatic Transfer Switch Source Selection

Defines voltage ranges for minimum startup, good, fair, and bad voltage conditions.

Quick Test

Procedure to test the ATS function by temporarily shutting down the primary UPS input.

Warranty and Product Registration

2-Year Limited Warranty

Details warranty terms, limitations, and exclusions for product defects and damages.

Product Registration

Instructions to register the product online for a chance to win a Tripp Lite product.

FCC Notice

Compliance statement regarding FCC rules for digital devices and potential interference.