To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite PDUV30HV and is the answer not in the manual?
General| Model | PDUV30HV |
|---|---|
| Input Current | 30A |
| Phase | Single-Phase |
| Network Management | No |
| Input Frequency | 50/60 Hz |
| Input Voltage | 200-240V |
| Output Voltage | 200-240V |
| Output Receptacles | C13 |
| Mounting | Rackmount |
| Agency Approvals | UL, cUL |
| Outlet Type | C13 |
| Dimensions | 3.5 x 2.2 x 17.7 inches |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 0% to 95% non-condensing |
Instructions for mounting the PDU in a rack using brackets.
Instructions for mounting the PDU in a rack using buttons.
Instructions for mounting the PDU under a counter.
Details the NEMA 5-15/20R outlet type for specific models.
Details the C13 outlet type for specific models.
Details the C19 outlet type for specific models.
Describes L5-30P, L6-20P, and L6-30P locking plug options.
Explains the function of the circuit breaker and reset procedure.
Describes the digital ammeter for displaying current usage.
Explains the meaning of Protection Present, Line Fault, and Line OK LEDs.
