Tripp Lite SRCOOLNET - Page 49

49
4. Telnet/SSH Console continued
4.2 System Configuration continued
4.2.2.1.4 Device Specific Menus continued
Detail Menu
-------- Device 1 Load Control Action Profile Detail ---------------------------
Name: load 1 off
Delay: 120
Device: 1
Load Control: Turn Off
Loads Chosen: 1
1- Modify Profile Name
2- Modify Delay
3- Select Load Control
4- Select Loads To Control
5- Apply To Device Events
A- Apply Changes
D- Delete
X- SNMP Trap Action Profiles Menu
M- Return to Main Menu
<ENTER> Refresh Menu
Menu Data
Load Control
This setting dictates what the load will do when the action is fired. The valid options are:
•TurnOff
•TurnOn
Load Selection
This is the list of loads that will be controlled by the action. The display will always be a comma separated list of loads. For data entry, the loads
may be entered as a comma separated, a range or a comma separated list that contains ranges.
The lists (1, 2, 3, 5, 6, 7) and (1-3, 5-7) would both be accepted and result in the same selection.
Ramp Action Menus
Summary Menu
-------- Device 1 Ramp Action Profile ------------------------------------------
-----------------------------------------------------------------------------
# | Name | DELAY
-----------------------------------------------------------------------------
1 ramp it up 0
#- Edit Profile
0- Add New Profile
X- Device Action Profile Menu
M- Return to Main Menu
<ENTER> Refresh Menu