75
4. Telnet/SSH Console continued
4.3 Network Configuration continued
4.3.2.2 Remote Syslog
These settings are used to define the remote syslog servers to send log entries. There are a maxmimum of 4 remote syslog servers that can be
defined. To enforce this maximum, there are 4 predefined slots for the servers. An available slot will have a blank Host value and default values for
Port, Log Level and Facility. Once all of those slots are used, no more may be defined. To add a new server to a slot, the user will select the num-
ber for the slot and then will be prompted for all of the values for that server. When a slot is chosen for a defined remote server, the detail menu for
that server will be displayed.
-------- Syslog Settings -------------------------------------------------------
# Host Port Log Level Facility
1 514 EMERGENCY 0
2 514 EMERGENCY 0
3 514 EMERGENCY 0
4 514 EMERGENCY 0
#- Syslog Server
X- Remote Services
M- Return to Main Menu
<ENTER> Refresh Menu
-------- Remote Syslog Server --------------------------------------------------
Host : remotesysloghost
Port : 514
Log Level : info
Facility : 23
1- Host
2- Port
3- Remote Syslog Severity Level
4- Facility
A- Apply Changes
C- Clear Syslog Server
X- Remote Syslog Servers
M- Return to Main Menu
<ENTER> Refresh Menu
>> a
To Next Page
Loading...
