62
4. Telnet/SSH Console continued
4.2 System Configuration continued
4.2.3.2 Local Users continued
Local User Summary Menu
-------- Local Users -----------------------------------------------------------
-----------------------------------------------------------------------------
# | NAME / COMMUNITY | SNMP
-----------------------------------------------------------------------------
1 localadmin SNMPV3
2 localmanager SNMPV3
3 localguest SNMPV3
4 public SNMPV1
5 tripplite SNMPV2c
6 mikemike None
7 User Not Defined
8 User Not Defined
9 User Not Defined
10 User Not Defined
11 User Not Defined
12 User Not Defined
#- User
X- Security Menu
M- Return to Main Menu
<ENTER> Refresh Menu
>> 1
Local User Detail Menu
-------- User Detail Menu ------------------------------------------------------
SNMP Protocol : SNMPV3
User Name : localadmin
Facility Permissions : DEFAULT FACILITY = Read Write
Outlet Realms :
ACL IP Address : ::
ACL IP Mask : ::
Password : localadmin
Auth Password : localadmin
Idle Timeout in Minutes : 0
Session Expiration in Min: 0
1- Name
2- Outlet Permissions
3- SNMP Protocol
4- ACL IP Address
5- ACL IP Mask
6- Password
7- Auth Password
8- Idle Timeout in Minutes
9- Session Expiration in Minutes
A- Apply Changes
X- Security Menu
M- Return to Main Menu
<ENTER> Refresh Menu
>> x
Default Users: Program users must have a minimum username length and password of 8 characters.
To Next Page
Loading...
