Need help?Do you have a question about the Tripp Lite SU60KX and is the answer not in the manual?
General| Output Voltage Regulation | ±1% |
|---|---|
| Frequency | 50/60 Hz |
| Waveform | Sine wave |
| Topology | Double-conversion online |
| Form Factor | Tower |
| Transfer Time | 0 ms |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Output Power Factor | 1.0 |
| Power Capacity | 60 kVA |
| Battery Type | Sealed lead-acid (VRLA) |
| Output Power | 60 kW |
| Efficiency | Up to 96% |
| Runtime at Half Load | Varies based on battery configuration |
Details technical specifications for different UPS models, including input, output, and performance parameters.
Detailed descriptions of single and parallel UPS operating modes like Online, Battery Backup, and Bypass.
Comprehensive procedures for system start-up, shutdown, and manual/auto bypass operations.
Details on RS232 port functions, pin assignments, and software for communication.
Explanation of the EPO button's function and operation, including REPO input.
Step-by-step guide to upgrading the UPS system board firmware via RS232.
Detailed instructions for upgrading firmware on individual power modules.
Step-by-step instructions for safely installing and removing internal UPS batteries.
Comprehensive list of warning messages, their conditions, and chapter references for troubleshooting.
Visual guides to diagnose and resolve common UPS operational issues using flow charts.
Methods for diagnosing and identifying failed or malfunctioning power modules using diagnostic tools.
Step-by-step instructions for safely removing and replacing power modules in the UPS unit.
Critical safety precautions, required PPE, and LOTO procedures for UPS servicing.
General procedures for performing visual inspections and checks during UPS maintenance.
Detailed steps for performing maintenance on internal battery modules.
To Next Page