3
System Requirements
Installation
• Computer with an available USB port
• Compatible with Windows, Mac and Linux
operating systems
1. Power on your computer and insert the
included CD driver into the CD ROM drive of
your computer. Note: If your computer does
not have a CD Drive, you can obtain the
driver at www.tripplite.com/support.
2. Launch the driver that corresponds with
your product and follow the prompts until
installation is completed.
3. Your computer will detect the adapter and
assign it a COM port upon completing the
installation.
4. To verify that your adapter has been
successfully installed, navigate to your
computer’s Control Panel and open the
Device Manager screen. The adapter will
appear in the Ports section, with its assigned
COM port next to it.
17-11-285-9337C6.indb 3 1/12/2018 4:49:42 PM
To Next Page
Loading...
Need help?
General
