TRIRIDE s.r.l.
ManUso_TRIRIDE_eng_r06 Pag. 33 di 49
USER MANUAL AND MAINTENANCE
12. USING TRIRIDE
IMAGE STEP/DESCRIPTION
To adjust the height and angle of the handlebar piece,
loosen the screws indicated with a 5 mm Allen key.
by Triride srl.
The user can choose the height to set the wheelchair’s
caster wheels above the ground, based on the roughness of
illustrated in the picture.
Instead, passing from hole 3 to hole 1, there is a lowering of the casters, to an increase in the overall
1
To Next Page
Loading...