4
Original Instructions
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Wear protective shoes
Wear protective clothing
Be aware of kickback!
Warning: Sharp blades or teeth!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting,
changing accessories, cleaning, carrying out maintenance
and when not in use!
WARNING: Moving parts can cause crush and cut injuries
Caution!
Class II construction
(double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Description of Symbols
The rating plate on your tool may show symbols. These represent
important information about the product or instructions on its use.
Specification
Model no: TTS1400
Voltage: 220-240V~ 50Hz
Power: 1400W
No load speed: 2000 – 5000min
-1
Bevel adjustment: 0° - 48°
Max depth of cut @ 90°: 54mm
Max depth of cut @ 45°: 38mm
Blade dimensions: Ø165mm x 20mm
Protection class:
Ingress protection: IP20
Weight: 5.5kg
Sound and vibration information
Sound pressure L
PA
:
83.8dB(A)
Sound power L
WA
:
94.8dB(A)
Uncertainty K: 3dB
Weighted Vibration a
h
(body): 3.976m/s
2
Vibration a
h
(handle): 3.534m/s
2
Uncertainty K: 1.5m/s
2
Thank you for purchasing this Triton tool. This manual contains
information necessary for safe and effective operation of this product.
This product has unique features and, even if you are familiar with
similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read
and fully understand this manual.
Introduction
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n
0
No load speed
Ø Diameter
° Degrees
As part of our ongoing product development, specifications of
Triton products may alter without notice. The sound intensity
level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct
level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense
of touch, numbness, tingling and reduced ability to grip. Long term
exposure can lead to a chronic condition. If necessary, limit the length
of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in the
specification relating to vibration to calculate the duration and frequency
of operating the tool.
Hz Hertz
W, kW Watt, kilowatt
/min or
min
-1
(revolutions or
reciprocation) per
minute
dB (A) Decibel – A weighted
m/s
2
Vibration magnitude
224627_Manual_26.09.17.indd 4 26/09/2017 10:38
To Next Page
Loading...
Need help?
General
